The main parameters of the cross shears are the technical parameters. The specific parameters included include the thickness of the processing plate, the width of the processing plate, the number of slitting, the slitting speed, and the unwinding weight. These are relatively general, if the equipment parameters are classified, then it is raw material parameters: material, plate thickness, plate width, coil inner and outer diameter, and the weight of the coil. Finished product parameters: strip inner diameter, strip outer diameter, strip width, winding weight and strip straightness. Equipment parameters: mainly the number of slitting, slitting speed, and the total power of the equipment.

The cross cutter shaft adopts high-precision spindle bearing support of the machine tool, and the axial and radial runout of the cutter shaft is small; the cutter disk adopts the three-point positioning and locking of the nut, and the dimensional accuracy is accurate and the locking is firm. This machine can be operated independently or in combination with the whole line, equipped with electromagnetic speed regulation device, and the slitting speed is convenient to adjust and the working reliability is high; the unwinding machine and the winding machine adopt hydraulic pressure reel and is equipped with a hydraulic rotary joint, and the cantilever end is set. With auxiliary support, good rigidity. The main actions of this production line are all in hydraulic form, with stable and reliable movement, low noise, and easy and reliable maintenance. With a double slitter head, the strip width is at least 30mm, and the maximum number of strips can be up to 12, with a strip thickness range of 0.3-1.0mm.

The cross shear line of the shearing machine is used to cut and level the metal coils into a desired length of flat sheet material and unstack them after uncoiling, leveling, cutting, and cutting of the transformer core cross shear lines. It is suitable for processing all kinds of cold-rolled and hot-rolled carbon steel, silicon steel, tinplate, stainless steel and all kinds of metal materials after surface coating. The cross shear line production line of horizontal shearing machine mainly consists of feeding car, uncoiler, leveling machine, feeding mechanism, shearing machine, conveying device and stacking device. A cross shear can be configured in the production line to cut the sheet into the desired width, cut to length, and stack. It is a high-performance product integrating machine, electricity and liquid.